GE INTELLIGENT PLATFORMS Industrial Partner

C2K - GE INTELLIGENT PLATFORMS-C2K- High Performance PICMG 2.16 6U CompactPCI Embedded...

larger image

Request Quote
For Price
Part Number:
C2K
Model Number:
C2K
Make:
GE INTELLIGENT PLATFORMS
Lead Time:
Available
Qty In Stock:
Available

GE INTELLIGENT PLATFORMS-C2K- High Performance PICMG 2.16 6U CompactPCI Embedded Computer Simple Type: CompactPCI PowerPC

Rugged PICMG 2.16 compliant 6U CompactPCI Single Board Computer features increased processor speeds, bus speeds and memory capacities making it an excellent choice for advanced defense, aerospace and homeland security applications

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 16 programmable GPIO ports with independent interrupts
  • C-style or N-style configurations
  • DDR333 SDRAM 512 MB, or 1 GB with ECC
  • Dual temperature sensor
  • Extended temperature range (-40°C to 85°C)
  • Four async RS-232 or sync/async RS-422 serial I/O ports (COM1, COM2, COM3, COM4)
  • Four sync/async RS-422/485 ports (COM5–COM8)
  • MPC7447A PowerPC® G4 host processor with 512 KB L2 cache
  • MV64460 system controller (Discovery III) bridge chip
  • Real-time clock with battery backup from system
  • Soldered boot flash up to 512 MB with multi-level write-protection
  • System and non-system (peripheral) mode
  • Three 10/100/1000 Ethernets ports
  • Three USB 2.0 ports at backplane; additional port at front panel (convection-cooled configuration only)
  • Two 1.5 Gbps SATA 1.0 ports
  • Two 64-bit IEEE 1386.1 PMC extension slots
  • Watchdog from MV64460

Specifications

    General
  • Environmental: Temperature Operating Storage C-style * 0°C to +70°C –40°C to +85°C N-style ** –40°C to +85°C –55°C to +105°C * Minimum airflow of 200 LFM required ** Measured at card edge. Humidity (non-condensing) Operating: 5–95% @ 40°C Storage: 5–95% @ 40°C Altitude Operating: 4.5 km (15,000 ft.) Storage: 12 km (40,000 ft.) Shock C-style 20g/11ms, 3 axes, up & down, 3 hits/direction N-style 40g/11ms, 3 axes, up & down, 3 hits/direction 100g/6ms, 3 axes, up & down, 3 hits/direction Vibration C-style 0.04g2/Hz @ 5–100Hz (2g rms), 60 min./axis N-style 0.1g2/Hz @ 5–2000Hz (12g rms), 60min./axis
  • Ethernet: Three 10/100/1000BaseT Ethernet port to rear I/O MACs provided by the MV64460 system controller Independent quad port PHY
  • Flash Storage: 128 flash memory Multi-level write-protection
  • Graphic Processor: 16 programmable GPIO ports Programmable for line direction (input, output), input polarity (inverted, non-inverted), output type (TTL, open-drain), interrupt type (edge, level sensitive) and interrupt masking +5V tolerant Independent interrupts for each port
  • Mechanical: PICMG 2.0 R3.0 and VITA 30.1 compliant 6U, 1 slot wide 233 mm x 160 mm x 20 mm Weight C-style: TBD N-style: TBD
  • MTBF: Calculations are available in accordance with MIL-HDBK-217.
  • PCI bus: Two PCI bus interfaces from MV64460 system controller PCI bus 0: 32/64-bit 33/66 MHz PCI/133 MHz PCI-X (dedicated to PMC0 site) PCI bus 1: 32/64-bit 33/66 MHz (shared by PMC1 site, USB controller, and PCI 6254 PCI bridge) Both PCI buses configurable VIO (+3.3V or +5V through on-board jumpers)
  • PMC #1: Two VITA 30.1-2001 and ANSI/VITA 20-2001-compliant PMC sites PMC0: 64-bit 33/66MHz PCI or 133MHz PCI-X PMC site on dedicated PCI bus 0 PMC1: 64-bit 33/66MHz PCI PMC site on shared PCI bus 1 Both PMC sites provide 64-bit user I/O (rear I/O) Both PMC sites (PCI busses) VIO configurable to +3.3V or +5V through on-board jumper
  • Power Connector: +5V, +3.3V, ±12V: Total power max. 7.5W per site
  • Power Requirements: +5V, +3.3V—required +12V required, -12V optional Battery backup for RTC (+3.3 on BATT+)
  • Processor: Motorola MPC7447A PowerPC G4 processor Core processor speeds up to 1 GHz High performance, low power, 32-bit PowerPC RISC architecture Superscalar processor 32 KB L1 instruction and data caches 512 KB L2 on-chip cache 64-bit 167 MHz MPX system bus interface to MV64460 system controller
  • RTC: Real-time clock feature for timekeeping functions Battery backup maintained through off-board +3.3V supply (provided by system through backplane (BATT+) pin at cPCI_J5)
  • Safety Criteria: Designed to meet standard UL1950/60950 Designed to meet FCC Part15, SubPart A
  • SATA: PCI-to-serial ATA host controller on PCI bus 1 Two 1.5 Gbps SATA 1.0 ports to backplane
  • SDRAM: Soldered DDR333 SDRAM SDRAM controller from MV64460 system controller 64-bit (72-bit with ECC) 167 MHz memory bus Capacities: 512 MB, or 1 GB
  • Serial: Two serial ports from multi-protocol serial controller (MPSC) integrated in the MV64460 system controller —COM1, COM2 Two serial ports from USARTs integrated in the FPGA—COM3, COM4 COM1, COM2: Two independent serial ports configurable as asynchronous RS-232 or synchronous/asynchronous RS-422 available at cPCI_J5 COM3, COM4: Two independent serial ports configurable as asynchronous RS-232 or synchronous/asynchronous RS-422 available at cPCI_J4 Software selectable Four independently configurable synchronous/asynchronous RS-422/485 serial ports: COM5–COM8 available at cPCI_4 USART integrated into FPGA
  • Technology: CPU die and ambient temperature Software readable from –55°C to +125°C
  • USB: Four USB 2.0 ports: three (USB1–USB3) to cPCI_J5 (all configurations) and one (USB4) to the front panel (C-style version only) Three speeds supported: USB1.0 (1.5 MHz), USB1.1 (12 MHz), and USB2.0 (480 MHz)
  • Watchdog Timer: MV64460 system controller Programmable intervals Interrupt and board reset triggers

 

Applications

  • None Available

Aliases

  • None Available