V5C - GE INTELLIGENT PLATFORMS V5C, CPU Boards 6U VMEBus Embedded PC with Dual Ethernet, Compatible with PC99 Design Specification

V5C - GE INTELLIGENT PLATFORMS V5C, CPU Boards 6U VMEBus Embedded PC...

Request Quote
For Price

Part Number:: V5C
Model Number:: V5C
Make:: GE INTELLIGENT PLATFORMS
Lead Time:: Available
Qty In Stock:: Available

GE INTELLIGENT PLATFORMS V5C, CPU Boards 6U VMEBus Embedded PC with Dual Ethernet, Compatible with PC99 Design Specification Simple Type: CPU Board

V5C is a high-performance 6U VME single wide Intel Pentium III processor-based SBC. Features include up to a 1 GHz processor, up to 768 MB memory, dual 10/100BaseT ethernet, 8/16-bit SCSI interface, 2 serial ports and a printer port. V5C is designed for maximum real-world performance. PMC expansion is accomplished using the DPMCC or TPMCC expansion module. Also supports M-Systems Flash Disk on Chip and compactflash Ordering Information V5C Embedded PC V5C XXXX - YY - Z XXXX = Memory (contact Us for memory capacities available) YYY = CPU speed in MHz (contact Us for CPU speeds available) Z = Front-panel option (contact Us for availability, please specify if V5B compatibility is required).

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

* Up to currently available processor speeds (consistent with product power requirements).
32 KB NVSRAM with Auto- Store
4 MB 69030 Video RAM
Compact Flash Disk on second IDE
Compatible with PC99 Design Specification
Dual 10/100Base TX Ethernet
Enhanced IDE Hard Disk interface and option for 2nd IDE
Fast SCSI-2 interface with Wide option
Flash Disk-On-Chip
Level 2 cache on CPU
Memory sizes up to 1 GB
PCI Expansion interface for Triple PMC Carrier Card (TPMCC)
Socket 370 Processor Pentium® III (to 1000 MHz* w/100MHz Front Side Bus) or Celeron® (to 600 MHz* w/66 MHz Front Side Bus)
USB, COM1, COM2, LPT1, Mouse and keyboard port
VME64-compliant with Universe II PCI to VMEbus interface w/5-row P1/P2
VMEbus hardwarecontrolled byte swapping.

Specifications

General

Cooling: 100 LFM forced air, minimum required for cooling
Disk Interfaces: Integrated floppy disk controller for one or two 1.44 MB 3.5-in. floppy disk drives through rear P2, IDE interface supporting two IDE drives, Fast SCSI-2 interface through P2
Enhanced IDE Drive: Bus mastering EIDE interface through P2, IDE supports two IDE drives with enhanced PIO access modes, Secondary IDE supports on-board CompactFlash™ disk or IDE drives through VME P2
Ethernet: Two Intel® 82559ER Ethernet Controllers with integrated PHY, IEEE 802.3-compatible, Dual front-panel RJ-45 connectors
Fast SCSI-2 Interface: Symbios® 53C875E SCSI processor, Fast SCSI-2 device support in asynchronous or synchronous mode, Data rates up to 20 MB/s in synchronous mode, Wide SCSI data rates of 40 MB/s in synchronous mode, Active SCSI terminators provided on-board to simplify SCSI chain termination
Humidity: 10 to 95% relative humidity, non-condensing
Level 2 Cache: L2 cache (integration with CPU dependent on processor option)
Mouse/Keyboard Interface: Ali® Aladdin-Pro 2 1543C Super I/O Controller, Microsoft® mouse and PS/2-style keyboard compatibility, Mouse and keyboard resident in a single connector, with reverse IBM standard (keyboard default, mouse through adapter), Mini-DIN “Y” adapter cable provided, Mini-DIN circular 6-pin front-panel connector
On-Board CompactFlash™ Slot: On-board CompactFlash drive slot, compatible with standard units such as SanDisk™ CompactFlash
Operating: 0° to 55° C, inlet air
Operating Shock: 6G maximum
Parallel Interface: Ali® Aladdin-Pro 2 1543C Super I/O Controller, Single parallel port (LPT1), Centronics parallel, PS/2bi-directional compatibility, Buffered parallel interface, Micro-miniature DB-25 front-panel connector
PCI Bus: Ali® ALADDiN-Pro 2 1543C North Bridge Controller, 32-bit 33 MHz PCI local bus
Physical Characteristics: 160 mm x 233 mm (dual Eurocard) 6U x 4HP, Multi-layer printed circuit, FR-4, 94 V-0 flammability rating (UL recognized manufacturers)
PMC Expansion Slots: High-density PMC expansion connector, Triple PMC Carrier Card (TPMCC), 32-bit/33 MHz PCI interface, Fully PCI-compliant PMV for embedded systems, Isolation and software access to PMC modules through PCI bridge chip on TPMCC, Concurrent PCI bus transactions for primary and secondary PCI buses
Power Requirements: +5 VDC @ 5A with 256 MB at 566 MHz (typical), +12 VDC @ 100mA maximum (CPU and memory dependent), -12 VDC @ (dependent on PMC modules installed)
Processor: Intel Pentium III
Processor - Socket 370: Scalable processing power with flexible processor design, Pentium III with up to 1000 MHz and 100 MHz FSB, Celeron with up to 600 MHz and 66 MHz FSB * Up to currently available processor speeds (consistent with product power requirements).
Programmable Board Configuration: Configuration set by firmware (reduces need for jumpers), Software configuration options set by embedded set-up utility or application software, Reliable and easy board setup (usually without having to remove board from chassis)
Serial Interface: Ali® Aladdin-Pro 2 1543C Super I/O Controller, Dual serial port interfaces: COM1—RS-232, COM2—RS-232/422/485, IBM® PC compatibility, Signals:TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, Front-panel DB9 connector for each port
Storage: -40° to 85° C
Storage Shock: 10G maximum
Support: Software support packages available for Linux®, Windows NT®, Windows 2000®, QNX®, and VxWorks
SVGA Video: 69030 Dual HiGVideo™ accelerator, 4 MB Embedded SDRAM memory, VGA and SVGA-compatible, 1600 x 1200 screen resolution (max.), Low power
System Memory: 256 MB SDRAM on-board memory (default), 256 MB and 512 MB options, 128 MB to 512 MB with soldered chips, SODIMM Expansion socket for memory upgrade to 1 GB
USB Interfaces: Ali® Aladdin-Pro 2 1543C Super I/O Controller, USB0 routed to standard USB connector on front panel, USB1 routed to P2 expansion
VME Bus: Tundra Universe II™ VMEbus interface controller, Programmable byte-swapping capability to integrate to 6800- configured VMEbus, Support for Intel® 32, Motorola® 32, and Intel® 16 byteswapping modes, Configuration: DTB Master, Option A32/A24/A16, D32/D16/D08(E0), RMV, Configuration: DTB Slave, Option A32/A24/A16, D32/D16/D08, RMV, Interrupter: Programmable, 1 of 7, Interrupt Handler: Programmable, 1H(1–7), Requester: Programmable, BR(3, 2, 1, 0) Option ROR and RWD, Arbiter: RRS, PRL, SGL, Block Mode Transfer: Master and slave BLT and MBLT D64/D32/D16, Disk interfaces provided onVME P2 connector, Extended VME signals on VME P2 (row B), Floppy, IDE, and SCSI signals on VME P2 (row A and C), SCSI Wide, Secondary IDE, and second USB on VME P2 (row D and Z)

Applications

None Available

Aliases

None Available

GE INTELLIGENT PLATFORMS Industrial Partner